Victory 200 – 100A & 125A AC Supply
The Victory 200 is our smallest variation in the range, covering EV Chargers from 7.4kW, through to 50kW. The Victory 200 has the ability to function with or without a DNO.
PME Earthing Specification comes as standard, however TT Earthing is available if required. Further bespoke modifications can be complete by contacting our sales team.
Cabinet Features
- Single Bay, Three Point Compression Locked Cabinet
- Accommodates up to eight EV Charge Points
- Fully Removable PDU, allowing cabinet shell installation prior to PDU.
- Removable Gland Plates for easy cable connection.
- Caters for 7.4kW to 50kW Electric Vehicle Chargers
- Heater Fitted as Standard
- Room for future upgrades – including Load Management Systems
Cabinet Specifications
- Dimensions: 650 x 365 x 1475mm
- Type 1 and 2 SPD (Surge Protection Device)
- 18mm Marine Plywood Backboard (Fitted for DNO Cut Out if Required)
- PME Earthing as Standard (TT & Other Specifications Available on Request)
- Powder Coating available in RAL 9005 (Black), RAL 6005 (Green), RAL 9016 (White) & RAL 00A09 (Grey) Any RAL Colour available on request for an uplift in price.
- Hot Dip Galvanising available on request.
Safety & Compliance
Safety and compliance is off the up-most importance. Our Victory Range has been designed with this in mind.
- BS EN 61439: Low Voltage Switch Gear and Control Gear Assemblies
- BS7671: IET Code of Practice for Electric Car Charging
- BS7671:2018 IET Wiring Regulations
- BS EN 12206-1:2004 Powder Coating Process
- NICEIC Compliant
Download A Datasheet
To find out more about the Victory 200, how it can support your EV Power Requirements, as well as each specification, please download the below datasheet, or give us a call.
Contact Us
Please use the form to enquire about our Victory Range. Please quote the order reference, found on each cabinet’s data sheet.