Victory 600 – 400A & 630A AC DNO Supply
The Victory 600 is our largest cabinet in the range, and covers EV Chargers from 7.4kW through to 120kW. The Victory 600 is designed to be utilised alongside a DNO.
PME Earthing Specification comes as standard, however TT Earthing is available if required. Further bespoke modifications can be complete by contacting our sales team.
Cabinet Features
- Double Door, Four Point Compression Locked Cabinet
- Accommodates up to thirty-four EV Charge Points
- Fully Integrated Panel Build with DNO Space
- Easy Termination – Pre Wired WAGO Terminals for easy connection.
- Caters for 7.4kW to 120kW Electric Vehicle Chargers
- Heater Fitted as Standard
- Room for future upgrades – including Load Management Systems
Cabinet Specifications
- Dimensions: 1900 x 382 x 1950mm
- Type 1 and 2 SPD (Surge Protection Device)
- 18mm Marine Plywood Backboard (Fitted for DNO Cut Out if Required)
- PME Earthing as Standard (TT & Other Specifications Available on Request)
- Powder Coating available in RAL 9005 (Black), RAL 6005 (Green), RAL 9016 (White) & RAL 00A09 (Grey) Any RAL Colour available on request for an uplift in price.
- Hot Dip Galvanising available on request.
Safety & Compliance
Safety and compliance is off the up-most importance. Our Victory Range has been designed with this in mind.
- BS EN 61439: Low Voltage Switch Gear and Control Gear Assemblies
- BS7671: IET Code of Practice for Electric Car Charging
- BS7671:2018 IET Wiring Regulations
- BS EN 12206-1:2004 Powder Coating Process
- NICEIC Compliant
Download A Datasheet
To find out more about the Victory 600, how it can support your EV Power Requirements, as well as each specification, please download the below datasheet, or give us a call.
Contact Us
Please use the form to enquire about our Victory Range. Please quote the order reference, found on each cabinet’s data sheet.